How to Install PPF on Car – Installation Guide

Whether your car is brand new or old, it’s important to look after it. One key part of this is keeping the paint looking good, which might be more challenging than you’d expect.

As you drive, your car will run into bits of rock, trash, and other things on the road that can scratch or chip the paint. If this happens a lot, you might find yourself needing to get those scratches fixed professionally, and that can get expensive. You can get it protected with paint protection film.

In this blog, we will explain to you a detailed guide on How to Apply Paint Protection Film. PPFs are virtually invisible when properly installed, preserving the vehicle’s original color and finish.

Paint Protection Film: Why It’s a Great Choice

1.   Offers Strong Protection Against Damage

Paint protection film is like a shield for your car, with several layers working together to keep bad stuff like dirt and harmful chemicals away. This means your car’s paint won’t get stained or chipped easily.

2.   Heals Small Scratches on Its Own

A cool thing about many top-notch car paint protection films is their ability to fix minor scratches. Thanks to some of its innovative technology in the film, a little heat from a heat gun and those little marks disappears.

3.   Gives Your Car a Fresh Look

Depending on the type of film you choose, it can make your car look even cooler. Applying the proper film can turn your car into a head-turner for a shiny or smooth matte finish.

4.   Keeps Your Car Clean from Sticky Residue

Unlike other films that leave behind a sticky mess, the best ones come off clean, leaving no weird textures or marks on your car’s surface.

5.   Stands Up to the Heat

Some paint protection films are super advanced, using technology to protect your car from heat. This helps keep parts of your vehicle, like the headlights, from getting cloudy or losing color so you can see better and stay safer when driving.

Tools you Need for PPF installation

Below are some of the most necessary PPF installation tools:

• Cleaning solution
• Microfiber towel
• Slip solution/soapy solution
• Sprayers
• Measuring tape
• Blade or sharp knife
• Heat gun
• Squeegee or plastic scraper

How To Install Paint Protection Film – Detailed Guide

To get a flawless finish after the PPF installation, the paint protection film must be protected precisely. Keep reading to get a detailed insight on how to install paint protection film:

Step 1: Clean your car

First things first, make sure your car is spotless. Dirt, bugs, and grime can mess up the sleek look of your paint protection film. A good tip is to steam clean your car in five easy steps to eliminate all that unwanted stuff.

Step 2: Gather your tools and prepare the surface

When you’re ready to put on the film, you must work quickly and carefully to avoid air bubbles or wrinkles. So, ensure you have everything you need close by – the film, a mild dish soap solution, soft cloths, and any other tools you’ll be using.

Step 3: Install the PPF on car

Lay the film on a clean surface, sticky side up, after peeling off the backing. Cover the sticky side of the film and the area of your car where you apply it with the soapy solution.

Now, carefully align and place the film onto your car. Gently sliding it will help avoid trapping air underneath.

Step 4: Remove excess air and soapy water beneath the film

Grab a squeegee and smooth out the film, pushing out the soapy water and any air bubbles. Use back-and-forth motions and work toward the edges. Quicken your squeegee strokes to push the air bubble and slip the soapy solution out.

Step 5: Let the PPF coating cure

Dry off the surface with a soft cloth to pick up any leftover soap and water. Take a close look for any tiny bubbles. If you find any, gently pop them with a needle. Seal the deal by running the squeegee along all edges and corners to ensure the film sticks perfectly. Let everything dry out for up to 48 hours to ensure the film is firmly attached and looks excellent.

Conclusion

If you have decided to install PPF and get it protected with PPF, we advise you to go to a professional detailer who is an expert in PPF installation. Now that we have explained the steps to apply PPF Coating, you can choose the best detailer based on your installation skills.